Manufacture of stainless steel ,duplex & super duplex stainless,Nickel Alloy steel pipe and tube.Incoloy ,Hastelloy ,Monel ,Hastelloy seamless tube and pipe.

TP310/310S/310H, 1.4841/1.4845, UNS S31000/S31008/S31009 Seamless Stainless Steel Pipe

HomeProducts & servicesAustenitic Stainless Steel Pipes And Tubes TP310/310S/310H, 1.4841/1.4845, UNS S31000/S31008/S31009 Seamless Stainless Steel Pipe
TP310/310S/310H, 1.4841/1.4845, UNS S31000/S31008/S31009 Seamless Stainless Steel Pipe

TP310/310S/310H, 1.4841/1.4845, UNS S31000/S31008/S31009 Seamless Stainless Steel Pipe

① STANDARD: ASTM A312/ ASTM A249/ ASTM A269/EN10216-5/ GOST 9940 /GOST 9941...

② OD RANGE : 6-812MM

③ THICKNESS RANGE: 1-65 MM

TP310/310S/310H, 1.4841/1.4845, UNS S31000/S31008/S31009 Chemical Composition

Grade C Mn P S Si Cr Mo Ni
TP310 ≤0.25
≤2.00
≤0.045
≤0.03
≤1.50
24.00-26.00 / 19.00-22.00
TP310S ≤0.08
≤2.00
≤0.045
≤0.03
1.00
24.00-26.00
/ 19.00-22.00
TP310H 0.04-0.10 ≤2.00
≤0.045
≤0.03
0.75
24.00-26.00
/ 19.00-22.00

TP310/310S/310H, 1.4841/1.4845, UNS S31000/S31008/S31009 Mechanical Properties

Grade
310
310S
310H
Tensile Strength
≥515Mpa
≥515Mpa
≥485Mpa
Yield strength
≥205Mpa
≥205Mpa
≥170Mpa
Elongation %
≥35
≥35
≥35
Hardness
≤90 HRB
≤90 HRB
≤90 HRB

TP310/310S/310H, 1.4841/1.4845, UNS S31000/S31008/S31009 Applications

  • Cryogenic Components
  • Food Processing
  • Furnaces—burners, doors, fans, piping, and recuperators
  • Fluidized Bed Furnaces—coal combustors, grids, piping, wind boxes
  • Ore Processing/Steel Plants—smelter and steel melting equipment, continuous casting equipment
  • Petroleum Refining—catalytic recovery systems, flares, recuperators, tube hangers
  • Power Generation—coal gasifier internals, pulverized coal burners, tube hangers
  • Sintering/Cement Plants—burners, burner shields, feeding and discharging systems, wind boxes
  • Thermal Processing—annealing covers and boxes, burner grids, doors, fans, muffles and retorts, recuperators, walking beams

TP310/310S/310H, 1.4841/1.4845, UNS S31000/S31008/S31009 Material Summary

310 stainless steel is a highly alloyed austenitic stainless steel used for high temperature application. The high chromium and nickel content give the steel excellent oxidation resistance as well as high strength at high temperature. This grade is also very ductile and has good weld ability enabling its widespread usage in many applications.

Stainless Steel 310H is the preferred metal of choice for high temperature conditions out of the 310 Stainless Steel grades. It finds use in the heat treatment industry, including the containment of concentrated acids. 310H is often exposed to sulfur dioxide environments and displays a high level of resistance to negative effects, as well as those from oxidation at high temperatures. The metal also displays increased resistance against creep corrosion.
While 310S is the low carbon version of the 310 grades, 310H is the high carbon modification of the metal specifically designed for better resistance to creep, as aforementioned. Its resistance to corrosion in high temperature environments exceeds that of many other stainless steel alloys. However, it does not display the same resistance against aqueous corrosion. In wet environments, its high carbon content works as a limitation.

One of our Services--Testing

  • EN 10204/3.1B, EN 10204 3.1 and EN 10204 3.2 Material Test Certificates (MTC)
  • Raw Materials Certificate
  • 100% Radiography Test Report
  • 100% PMI
  • Heat Treatment Charts
  • Third Party Inspection Report
  • Surface roughness and size measurement
  • Manufacturer Test Certificate( Impact Testing, Flatten, Spin,Curve, Hardness, Intergranular ,Point corrosions, Grain size, ET,UT, HT...)
  • Laboratory Test Certificate from Govt. Approved Lab
  • ......

One of our Services--End of Pipe and Tube

  • BE : Beveled end
  • BBE : Bevel both ends
  • BLE : Bevel large end
  • BSE : Bevel small end
  • TOE / POE = Treaded One End / Plain One End
  • TOE / BOE = Treaded One End / Beveled One End
  • POE / BOE = Plain One End / Beveled One End
  • TBE = Treaded Both Ends
  • PBE = Plain Both Ends

One of our Services--Packing

  • Ply Wooden Boxes
  • PE Fabric Bundles
  • Standard seaworthy export packing
  • Plastic Bags, or as required

One of our Services--Marking

  • Supplier / Manufacturer Name or Custom Logo - on request
  • Specification
  • Material Grade
  • Nominal Size
  • Schedule or Wall Thickness
  • Method of Manufacturing (Seamless or Welded)
  • Heat Number

Marked Pipe Sample: XTD ASTM A312  TP310S  SEAMLESS 42.2x 3.56*6000MM HEAT NO. 2023121205A15

If you have any enquiry about quotation or cooperation,please feel free to email us at or use the following enquiry form. Our sales will contact you within 24 hours. Thank you for your interest in our products.